
01 / 12
Heat pump repair
Digital gauges hang by the outdoor unit while the heat pump runs. Superheat and subcooling show whether the charge, a valve or the defrost board is the problem.
Read the service page
FAQ
Short, direct answers on booking, pricing, where our trucks go, what we fix and how our licenses work. Anything missing here, the office can answer by phone every day from 8 AM to 7 PM.
The questions people raise most often when they call: how to get on the schedule, how the diagnostic fee behaves, which towns we reach, and what our technicians can and cannot repair. Every answer leads with the short version, whether you are in a Meadow Springs two-story, a Sandifur Parkway new build or a farmhouse out past Finley.
Online, the booking form asks for two things: a day, and an arrival window that suits you. By phone, the office takes the same details from 8 AM to 7 PM, any day. The office calls back to confirm, and the technician checks in by phone en route. Jot down the brand, the model number off the rating tag, and what the equipment is doing, because those three details shape what gets loaded on the truck.
Yes. Diagnosis is a paid visit, and the office names the amount on the phone or when it confirms a booking made online. Should you then approve the fix, that amount is absorbed into the repair total rather than billed again. Should you skip the fix, the diagnostic amount is the whole invoice. Either way, the repair price is in writing before the technician lifts a tool.
Yes. After testing, the technician writes out the price, and parts stay in their boxes until you agree. A special-order part shows up on that estimate with its cost before anyone orders it. Approve on the spot, ask questions first, or sleep on it; say no, and you owe for the diagnosis and nothing more.
Seven communities: Pasco, Burbank, Kennewick, Finley, Richland, West Richland and Benton City. That stretches from newer subdivisions like Loviisa Farms and Badger Mountain South to older neighborhoods like Hansen Park and East Pasco, and out to rural ground near Red Mountain and across the Snake in Burbank. Finley addresses carry Kennewick ZIP codes. Near the edge of the map? Call and ask.
It means auxiliary heat, the backup heat strips, is running. That is normal during defrost and on the coldest nights, when a cold snap pushes lows toward 10°F and the heat pump needs help. If that light glows through mild afternoons, or the outdoor coil stays iced, the heat pump may have a defrost, reversing valve or refrigerant problem that a technician should test.
Look at the filter first, then the outdoor unit: a clogged filter or a condenser coil caked with dust and cottonwood fluff both cut capacity. Confirm the outdoor fan is spinning. If it still falls behind, a technician measures temperature split, superheat and subcooling, and static pressure to separate a low charge from an airflow or TXV problem. Hot attic ducts in two-story homes add to the struggle.
Cold storage, laundry and cooking equipment: fridges, freezers and ice makers; washers and dryers; dishwashers; and ranges, ovens and cooktops. Brands include Speed Queen, Bosch, Electrolux, Kenmore, Frigidaire, Maytag, KitchenAid, Whirlpool, GE and LG. Our 07D Appliance Repair specialty covers this work. Share the brand and model with the office at booking so the technician arrives ready for that machine.
Most often the water never reaches it: a filter packed with sediment, an inlet valve that has weakened, or ice blocking the fill tube. Hard water and well sediment, both familiar around Kennewick and the rural towns, narrow the inlet valve screen over time. Sometimes the module itself has died, or the freezer is holding too warm a temperature to make ice. A technician tests the valve coil and module before quoting.
Every repair and install comes with warranty terms written on the invoice, so you can read what is covered before the technician leaves. Keep that invoice. If the same problem returns within those terms, call the office and mention it, and a return visit will be set up. Having it in writing means nobody depends on memory if a question comes up months later.
Yes. Request a Spanish reply by phone or through the online booking, and the office responds in Spanish. The site also has a Spanish version with the same booking form and the same pricing policy. It is an ordinary request here, and households in Pasco and all across the Tri-Cities make it whenever it suits them.
Search Washington L&I Verify for LARCHHA742PL, our electrical contractor license, which carries specialties 06A (HVAC/Refrigeration) along with 07D (Appliance Repair), or for LARCHHA745PW, our general contractor license. The lookup is public and shows whether each license is active. Our technicians also hold the EPA 608 Universal refrigerant credential, which federal rules require for anyone opening a refrigerant circuit.
No. We work on the furnace itself, including the gas valve, igniter, burners, flame sensor, inducer and pressure switch, and we test power at the equipment. Running gas piping, adding wiring or receptacles, and panel work are outside what we take on. Should the house smell of gas, get everyone out first, then, from the yard, phone 911 or the gas utility.
Talk to us
Ring the office any day between 8 AM and 7 PM, or grab an arrival window on the online form and ask your question during the confirming call.
One photo per tab from our service calls. Tap a tab, or let the file turn on its own.

01 / 12
Digital gauges hang by the outdoor unit while the heat pump runs. Superheat and subcooling show whether the charge, a valve or the defrost board is the problem.
Read the service page
02 / 12
An older condenser under test with hoses on the service ports. The capacitor, contactor and fan motor get checked before anyone talks about refrigerant.
Read the service page
03 / 12
The burner compartment of a gas furnace, open. We follow the start-up order, inducer, pressure switch, igniter, flame sensor, until the step that fails.
Read the service page
04 / 12
A recovery machine and cylinder beside an outdoor unit. On a replacement, the old refrigerant is pulled into the cylinder instead of the air.
Read the service page
05 / 12
A ductless outdoor unit with a gauge set on it. Mini-splits get the same pressure and temperature readings as a central system, plus a look at the line-set insulation.
Read the service page
06 / 12
Gauges on a condenser during a seasonal visit. Spring visits wash the dust out of the coil; fall visits test defrost and heat strips before the fog weeks.
Read the service page
07 / 12
Gauges connected to a built-in refrigerator's sealed system. Leak searches, brazing and recharges happen in the kitchen, so the fridge stays where it is.
Read the service page
08 / 12
A top-load washer with the top panel raised. Lid switch, drive coupler and drain pump are all within reach once the top comes up.
Read the service page
09 / 12
An electric dryer opened up in a laundry room. The thermal fuse, the heating element and the vent run behind the machine get tested together.
Read the service page
10 / 12
Door open and racks out on a dishwasher. A puddle left behind after the last rinse sends us to the filter screen, the pump and the hose route under the sink, in that order.
Read the service page
11 / 12
A five-burner gas range ready for testing. Burner igniters, the spark module and the bake igniter's amp draw are measured before a part is ordered.
Read the service page
12 / 12
A French-door refrigerator open for diagnosis. Slow ice starts with the water: the inlet valve, the filter and a fill tube that can freeze shut.
Read the service pageBook a visit
One slip, filled top to bottom. The office phones to confirm the visit, and the technician calls again when on the way.
Every number below is a public state record. Look each one up on L&I Verify, or read what each license allows on our licenses page.
What our licenses cover